Son bir yıl içinde ikici 1 TB seagate diskimde bozuldu.
Önemli bilgilerimin bir kısmını kayıp etsemde, büyük çoğunluğunu testdisk ile kurtarabildim.
Testdisk programını yazanlara teşekkür ederim.
Bozuk disklerden veri kurtarma ihtiyacı duyarsanız, testdiski kullanabilirsiniz.
http://www.cgsecurity.org/
Diskin verdiği hatalar ve smartctl programının söyledikleri aşağıda;
[ 376.905084] ata5.00: configured for UDMA/133
[ 376.905098] sd 4:0:0:0: [sdd] Unhandled sense code
[ 376.905101] sd 4:0:0:0: [sdd]
[ 376.905103] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 376.905106] sd 4:0:0:0: [sdd]
[ 376.905108] Sense Key : Medium Error [current] [descriptor]
[ 376.905111] Descriptor sense data with sense descriptors (in hex):
[ 376.905113] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 376.905122] 00 00 08 00
[ 376.905126] sd 4:0:0:0: [sdd]
[ 376.905129] Add. Sense: Unrecovered read error - auto reallocate failed
[ 376.905131] sd 4:0:0:0: [sdd] CDB:
[ 376.905133] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 376.905141] end_request: I/O error, dev sdd, sector 2048
[ 376.905145] Buffer I/O error on device sdd1, logical block 0
[ 376.905159] ata5: EH complete
[ 379.772490] ata5.00: exception Emask 0x0 SAct 0xc0000 SErr 0x0 action 0x0
[ 379.772496] ata5.00: irq_stat 0x40000008
[ 379.772500] ata5.00: failed command: READ FPDMA QUEUED
[ 379.772507] ata5.00: cmd 60/08:90:00:08:00/00:00:00:00:00/40 tag 18 ncq 4096 in
[ 379.772507] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 379.772510] ata5.00: status: { DRDY ERR }
[ 379.772512] ata5.00: error: { UNC }
[ 379.803078] ata5.00: configured for UDMA/133
[ 379.803093] sd 4:0:0:0: [sdd] Unhandled sense code
[ 379.803096] sd 4:0:0:0: [sdd]
[ 379.803098] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 379.803100] sd 4:0:0:0: [sdd]
[ 379.803102] Sense Key : Medium Error [current] [descriptor]
[ 379.803106] Descriptor sense data with sense descriptors (in hex):
[ 379.803107] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 379.803116] 00 00 08 00
[ 379.803120] sd 4:0:0:0: [sdd]
[ 379.803123] Add. Sense: Unrecovered read error - auto reallocate failed
[ 379.803125] sd 4:0:0:0: [sdd] CDB:
[ 379.803127] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 379.803135] end_request: I/O error, dev sdd, sector 2048
[ 379.803139] Buffer I/O error on device sdd1, logical block 0
[ 379.803154] ata5: EH complete
[ 382.678151] ata5.00: exception Emask 0x0 SAct 0xa00000 SErr 0x0 action 0x0
[ 382.678157] ata5.00: irq_stat 0x40000008
[ 382.678161] ata5.00: failed command: READ FPDMA QUEUED
[ 382.678168] ata5.00: cmd 60/08:a8:00:08:00/00:00:00:00:00/40 tag 21 ncq 4096 in
[ 382.678168] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 382.678171] ata5.00: status: { DRDY ERR }
[ 382.678173] ata5.00: error: { UNC }
[ 382.708699] ata5.00: configured for UDMA/133
[ 382.708714] sd 4:0:0:0: [sdd] Unhandled sense code
[ 382.708717] sd 4:0:0:0: [sdd]
[ 382.708719] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 382.708722] sd 4:0:0:0: [sdd]
[ 382.708723] Sense Key : Medium Error [current] [descriptor]
[ 382.708727] Descriptor sense data with sense descriptors (in hex):
[ 382.708729] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 382.708737] 00 00 08 00
[ 382.708741] sd 4:0:0:0: [sdd]
[ 382.708744] Add. Sense: Unrecovered read error - auto reallocate failed
[ 382.708746] sd 4:0:0:0: [sdd] CDB:
[ 382.708748] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 382.708756] end_request: I/O error, dev sdd, sector 2048
[ 382.708760] Buffer I/O error on device sdd1, logical block 0
[ 382.708775] ata5: EH complete
[ 526.762467] ata5.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
[ 526.762473] ata5.00: irq_stat 0x40000008
[ 526.762478] ata5.00: failed command: READ FPDMA QUEUED
[ 526.762484] ata5.00: cmd 60/08:f0:00:08:00/00:00:00:00:00/40 tag 30 ncq 4096 in
[ 526.762484] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 526.762487] ata5.00: status: { DRDY ERR }
[ 526.762489] ata5.00: error: { UNC }
[ 526.785019] ata5.00: configured for UDMA/133
[ 526.785032] sd 4:0:0:0: [sdd] Unhandled sense code
[ 526.785036] sd 4:0:0:0: [sdd]
[ 526.785038] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 526.785040] sd 4:0:0:0: [sdd]
[ 526.785042] Sense Key : Medium Error [current] [descriptor]
[ 526.785045] Descriptor sense data with sense descriptors (in hex):
[ 526.785047] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 526.785056] 00 00 08 00
[ 526.785060] sd 4:0:0:0: [sdd]
[ 526.785063] Add. Sense: Unrecovered read error - auto reallocate failed
[ 526.785065] sd 4:0:0:0: [sdd] CDB:
[ 526.785067] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 526.785075] end_request: I/O error, dev sdd, sector 2048
[ 526.785079] Buffer I/O error on device sdd, logical block 256
[ 526.785091] ata5: EH complete
[ 529.484965] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 529.484970] ata5.00: irq_stat 0x40000008
[ 529.484974] ata5.00: failed command: READ FPDMA QUEUED
[ 529.484980] ata5.00: cmd 60/08:00:00:08:00/00:00:00:00:00/40 tag 0 ncq 4096 i n
[ 529.484980] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 529.484984] ata5.00: status: { DRDY ERR }
[ 529.484986] ata5.00: error: { UNC }
[ 529.507667] ata5.00: configured for UDMA/133
[ 529.507679] sd 4:0:0:0: [sdd] Unhandled sense code
[ 529.507682] sd 4:0:0:0: [sdd]
[ 529.507684] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 529.507687] sd 4:0:0:0: [sdd]
[ 529.507689] Sense Key : Medium Error [current] [descriptor]
[ 529.507692] Descriptor sense data with sense descriptors (in hex):
[ 529.507694] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 529.507702] 00 00 08 00
[ 529.507706] sd 4:0:0:0: [sdd]
[ 529.507709] Add. Sense: Unrecovered read error - auto reallocate failed
[ 529.507711] sd 4:0:0:0: [sdd] CDB:
[ 529.507713] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 529.507721] end_request: I/O error, dev sdd, sector 2048
[ 529.507724] Buffer I/O error on device sdd, logical block 256
[ 529.507738] ata5: EH complete
[ 540.991063] ata5.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x0
[ 540.991069] ata5.00: irq_stat 0x40000008
[ 540.991073] ata5.00: failed command: READ FPDMA QUEUED
[ 540.991080] ata5.00: cmd 60/08:58:00:08:00/00:00:00:00:00/40 tag 11 ncq 4096 in
[ 540.991080] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 540.991083] ata5.00: status: { DRDY ERR }
[ 540.991085] ata5.00: error: { UNC }
[ 541.013754] ata5.00: configured for UDMA/133
[ 541.013768] sd 4:0:0:0: [sdd] Unhandled sense code
[ 541.013771] sd 4:0:0:0: [sdd]
[ 541.013773] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 541.013775] sd 4:0:0:0: [sdd]
[ 541.013777] Sense Key : Medium Error [current] [descriptor]
[ 541.013781] Descriptor sense data with sense descriptors (in hex):
[ 541.013782] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 541.013791] 00 00 08 00
[ 541.013795] sd 4:0:0:0: [sdd]
[ 541.013798] Add. Sense: Unrecovered read error - auto reallocate failed
[ 541.013800] sd 4:0:0:0: [sdd] CDB:
[ 541.013802] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 541.013810] end_request: I/O error, dev sdd, sector 2048
[ 541.013814] Buffer I/O error on device sdd, logical block 256
[ 541.013825] ata5: EH complete
[ 543.838454] ata5.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x0
[ 543.838460] ata5.00: irq_stat 0x40000008
[ 543.838464] ata5.00: failed command: READ FPDMA QUEUED
[ 543.838471] ata5.00: cmd 60/08:60:00:08:00/00:00:00:00:00/40 tag 12 ncq 4096 in
[ 543.838471] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 543.838474] ata5.00: status: { DRDY ERR }
[ 543.838476] ata5.00: error: { UNC }
[ 543.861117] ata5.00: configured for UDMA/133
[ 543.861131] sd 4:0:0:0: [sdd] Unhandled sense code
[ 543.861134] sd 4:0:0:0: [sdd]
[ 543.861136] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 543.861139] sd 4:0:0:0: [sdd]
[ 543.861140] Sense Key : Medium Error [current] [descriptor]
[ 543.861144] Descriptor sense data with sense descriptors (in hex):
[ 543.861146] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 543.861154] 00 00 08 00
[ 543.861159] sd 4:0:0:0: [sdd]
[ 543.861161] Add. Sense: Unrecovered read error - auto reallocate failed
[ 543.861164] sd 4:0:0:0: [sdd] CDB:
[ 543.861165] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 543.861173] end_request: I/O error, dev sdd, sector 2048
[ 543.861177] Buffer I/O error on device sdd, logical block 256
[ 543.861190] ata5: EH complete
[ 718.769495] ata5.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
[ 718.769502] ata5.00: irq_stat 0x40000008
[ 718.769506] ata5.00: failed command: READ FPDMA QUEUED
[ 718.769513] ata5.00: cmd 60/08:a0:00:08:00/00:00:00:00:00/40 tag 20 ncq 4096 in
[ 718.769513] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 718.769516] ata5.00: status: { DRDY ERR }
[ 718.769518] ata5.00: error: { UNC }
[ 718.792080] ata5.00: configured for UDMA/133
[ 718.792096] sd 4:0:0:0: [sdd] Unhandled sense code
[ 718.792099] sd 4:0:0:0: [sdd]
[ 718.792101] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 718.792104] sd 4:0:0:0: [sdd]
[ 718.792106] Sense Key : Medium Error [current] [descriptor]
[ 718.792109] Descriptor sense data with sense descriptors (in hex):
[ 718.792111] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 718.792120] 00 00 08 00
[ 718.792124] sd 4:0:0:0: [sdd]
[ 718.792126] Add. Sense: Unrecovered read error - auto reallocate failed
[ 718.792129] sd 4:0:0:0: [sdd] CDB:
[ 718.792131] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 718.792139] end_request: I/O error, dev sdd, sector 2048
[ 718.792143] Buffer I/O error on device sdd, logical block 256
[ 718.792157] ata5: EH complete
[ 972.020852] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 9VP6HXA8
LU WWN Device Id: 5 000c50 0203c63ad
Firmware Version: CC38
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Jul 20 00:47:30 2014 EEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 095 095 006 Pre-fail Always - 232921558
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 420
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 84637
9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31541
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 621
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 315
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 057 045 Old_age Always - 31 (Min/Max 26/31)
194 Temperature_Celsius 0x0022 031 043 000 Old_age Always - 31 (0 26 0 0 0)
195 Hardware_ECC_Recovered 0x001a 027 017 000 Old_age Always - 232921558
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 70776766071255
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 77790758
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 137947391
SMART Error Log Version: 1
ATA Error Count: 320 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 320 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 00 08 00 40 00 00:12:26.380 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:26.379 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:26.370 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:26.370 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:26.370 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 319 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:23.263 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:23.262 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:23.253 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:23.253 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:23.253 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 318 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:20.106 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:20.105 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:20.032 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:20.032 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:20.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 317 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:16.939 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:16.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:16.929 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:16.929 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:16.929 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 316 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 00 40 00 00:12:13.800 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:13.799 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:13.791 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:13.790 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:13.790 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Önemli bilgilerimin bir kısmını kayıp etsemde, büyük çoğunluğunu testdisk ile kurtarabildim.
Testdisk programını yazanlara teşekkür ederim.
Bozuk disklerden veri kurtarma ihtiyacı duyarsanız, testdiski kullanabilirsiniz.
http://www.cgsecurity.org/
Seagate disklerine 3 yıldan fazla kullanmamak, 3 yılını dolduran diskleri bozulmasa bile yenisi ile değiştirmek gerekiyor!!!!
Diskin verdiği hatalar ve smartctl programının söyledikleri aşağıda;
[ 376.905084] ata5.00: configured for UDMA/133
[ 376.905098] sd 4:0:0:0: [sdd] Unhandled sense code
[ 376.905101] sd 4:0:0:0: [sdd]
[ 376.905103] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 376.905106] sd 4:0:0:0: [sdd]
[ 376.905108] Sense Key : Medium Error [current] [descriptor]
[ 376.905111] Descriptor sense data with sense descriptors (in hex):
[ 376.905113] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 376.905122] 00 00 08 00
[ 376.905126] sd 4:0:0:0: [sdd]
[ 376.905129] Add. Sense: Unrecovered read error - auto reallocate failed
[ 376.905131] sd 4:0:0:0: [sdd] CDB:
[ 376.905133] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 376.905141] end_request: I/O error, dev sdd, sector 2048
[ 376.905145] Buffer I/O error on device sdd1, logical block 0
[ 376.905159] ata5: EH complete
[ 379.772490] ata5.00: exception Emask 0x0 SAct 0xc0000 SErr 0x0 action 0x0
[ 379.772496] ata5.00: irq_stat 0x40000008
[ 379.772500] ata5.00: failed command: READ FPDMA QUEUED
[ 379.772507] ata5.00: cmd 60/08:90:00:08:00/00:00:00:00:00/40 tag 18 ncq 4096 in
[ 379.772507] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 379.772510] ata5.00: status: { DRDY ERR }
[ 379.772512] ata5.00: error: { UNC }
[ 379.803078] ata5.00: configured for UDMA/133
[ 379.803093] sd 4:0:0:0: [sdd] Unhandled sense code
[ 379.803096] sd 4:0:0:0: [sdd]
[ 379.803098] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 379.803100] sd 4:0:0:0: [sdd]
[ 379.803102] Sense Key : Medium Error [current] [descriptor]
[ 379.803106] Descriptor sense data with sense descriptors (in hex):
[ 379.803107] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 379.803116] 00 00 08 00
[ 379.803120] sd 4:0:0:0: [sdd]
[ 379.803123] Add. Sense: Unrecovered read error - auto reallocate failed
[ 379.803125] sd 4:0:0:0: [sdd] CDB:
[ 379.803127] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 379.803135] end_request: I/O error, dev sdd, sector 2048
[ 379.803139] Buffer I/O error on device sdd1, logical block 0
[ 379.803154] ata5: EH complete
[ 382.678151] ata5.00: exception Emask 0x0 SAct 0xa00000 SErr 0x0 action 0x0
[ 382.678157] ata5.00: irq_stat 0x40000008
[ 382.678161] ata5.00: failed command: READ FPDMA QUEUED
[ 382.678168] ata5.00: cmd 60/08:a8:00:08:00/00:00:00:00:00/40 tag 21 ncq 4096 in
[ 382.678168] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 382.678171] ata5.00: status: { DRDY ERR }
[ 382.678173] ata5.00: error: { UNC }
[ 382.708699] ata5.00: configured for UDMA/133
[ 382.708714] sd 4:0:0:0: [sdd] Unhandled sense code
[ 382.708717] sd 4:0:0:0: [sdd]
[ 382.708719] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 382.708722] sd 4:0:0:0: [sdd]
[ 382.708723] Sense Key : Medium Error [current] [descriptor]
[ 382.708727] Descriptor sense data with sense descriptors (in hex):
[ 382.708729] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 382.708737] 00 00 08 00
[ 382.708741] sd 4:0:0:0: [sdd]
[ 382.708744] Add. Sense: Unrecovered read error - auto reallocate failed
[ 382.708746] sd 4:0:0:0: [sdd] CDB:
[ 382.708748] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 382.708756] end_request: I/O error, dev sdd, sector 2048
[ 382.708760] Buffer I/O error on device sdd1, logical block 0
[ 382.708775] ata5: EH complete
[ 526.762467] ata5.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
[ 526.762473] ata5.00: irq_stat 0x40000008
[ 526.762478] ata5.00: failed command: READ FPDMA QUEUED
[ 526.762484] ata5.00: cmd 60/08:f0:00:08:00/00:00:00:00:00/40 tag 30 ncq 4096 in
[ 526.762484] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 526.762487] ata5.00: status: { DRDY ERR }
[ 526.762489] ata5.00: error: { UNC }
[ 526.785019] ata5.00: configured for UDMA/133
[ 526.785032] sd 4:0:0:0: [sdd] Unhandled sense code
[ 526.785036] sd 4:0:0:0: [sdd]
[ 526.785038] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 526.785040] sd 4:0:0:0: [sdd]
[ 526.785042] Sense Key : Medium Error [current] [descriptor]
[ 526.785045] Descriptor sense data with sense descriptors (in hex):
[ 526.785047] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 526.785056] 00 00 08 00
[ 526.785060] sd 4:0:0:0: [sdd]
[ 526.785063] Add. Sense: Unrecovered read error - auto reallocate failed
[ 526.785065] sd 4:0:0:0: [sdd] CDB:
[ 526.785067] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 526.785075] end_request: I/O error, dev sdd, sector 2048
[ 526.785079] Buffer I/O error on device sdd, logical block 256
[ 526.785091] ata5: EH complete
[ 529.484965] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 529.484970] ata5.00: irq_stat 0x40000008
[ 529.484974] ata5.00: failed command: READ FPDMA QUEUED
[ 529.484980] ata5.00: cmd 60/08:00:00:08:00/00:00:00:00:00/40 tag 0 ncq 4096 i n
[ 529.484980] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 529.484984] ata5.00: status: { DRDY ERR }
[ 529.484986] ata5.00: error: { UNC }
[ 529.507667] ata5.00: configured for UDMA/133
[ 529.507679] sd 4:0:0:0: [sdd] Unhandled sense code
[ 529.507682] sd 4:0:0:0: [sdd]
[ 529.507684] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 529.507687] sd 4:0:0:0: [sdd]
[ 529.507689] Sense Key : Medium Error [current] [descriptor]
[ 529.507692] Descriptor sense data with sense descriptors (in hex):
[ 529.507694] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 529.507702] 00 00 08 00
[ 529.507706] sd 4:0:0:0: [sdd]
[ 529.507709] Add. Sense: Unrecovered read error - auto reallocate failed
[ 529.507711] sd 4:0:0:0: [sdd] CDB:
[ 529.507713] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 529.507721] end_request: I/O error, dev sdd, sector 2048
[ 529.507724] Buffer I/O error on device sdd, logical block 256
[ 529.507738] ata5: EH complete
[ 540.991063] ata5.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x0
[ 540.991069] ata5.00: irq_stat 0x40000008
[ 540.991073] ata5.00: failed command: READ FPDMA QUEUED
[ 540.991080] ata5.00: cmd 60/08:58:00:08:00/00:00:00:00:00/40 tag 11 ncq 4096 in
[ 540.991080] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 540.991083] ata5.00: status: { DRDY ERR }
[ 540.991085] ata5.00: error: { UNC }
[ 541.013754] ata5.00: configured for UDMA/133
[ 541.013768] sd 4:0:0:0: [sdd] Unhandled sense code
[ 541.013771] sd 4:0:0:0: [sdd]
[ 541.013773] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 541.013775] sd 4:0:0:0: [sdd]
[ 541.013777] Sense Key : Medium Error [current] [descriptor]
[ 541.013781] Descriptor sense data with sense descriptors (in hex):
[ 541.013782] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 541.013791] 00 00 08 00
[ 541.013795] sd 4:0:0:0: [sdd]
[ 541.013798] Add. Sense: Unrecovered read error - auto reallocate failed
[ 541.013800] sd 4:0:0:0: [sdd] CDB:
[ 541.013802] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 541.013810] end_request: I/O error, dev sdd, sector 2048
[ 541.013814] Buffer I/O error on device sdd, logical block 256
[ 541.013825] ata5: EH complete
[ 543.838454] ata5.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x0
[ 543.838460] ata5.00: irq_stat 0x40000008
[ 543.838464] ata5.00: failed command: READ FPDMA QUEUED
[ 543.838471] ata5.00: cmd 60/08:60:00:08:00/00:00:00:00:00/40 tag 12 ncq 4096 in
[ 543.838471] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 543.838474] ata5.00: status: { DRDY ERR }
[ 543.838476] ata5.00: error: { UNC }
[ 543.861117] ata5.00: configured for UDMA/133
[ 543.861131] sd 4:0:0:0: [sdd] Unhandled sense code
[ 543.861134] sd 4:0:0:0: [sdd]
[ 543.861136] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 543.861139] sd 4:0:0:0: [sdd]
[ 543.861140] Sense Key : Medium Error [current] [descriptor]
[ 543.861144] Descriptor sense data with sense descriptors (in hex):
[ 543.861146] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 543.861154] 00 00 08 00
[ 543.861159] sd 4:0:0:0: [sdd]
[ 543.861161] Add. Sense: Unrecovered read error - auto reallocate failed
[ 543.861164] sd 4:0:0:0: [sdd] CDB:
[ 543.861165] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 543.861173] end_request: I/O error, dev sdd, sector 2048
[ 543.861177] Buffer I/O error on device sdd, logical block 256
[ 543.861190] ata5: EH complete
[ 718.769495] ata5.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
[ 718.769502] ata5.00: irq_stat 0x40000008
[ 718.769506] ata5.00: failed command: READ FPDMA QUEUED
[ 718.769513] ata5.00: cmd 60/08:a0:00:08:00/00:00:00:00:00/40 tag 20 ncq 4096 in
[ 718.769513] res 41/40:08:00:08:00/00:00:00:00:00/00 Emask 0x409 (med ia error) <F>
[ 718.769516] ata5.00: status: { DRDY ERR }
[ 718.769518] ata5.00: error: { UNC }
[ 718.792080] ata5.00: configured for UDMA/133
[ 718.792096] sd 4:0:0:0: [sdd] Unhandled sense code
[ 718.792099] sd 4:0:0:0: [sdd]
[ 718.792101] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 718.792104] sd 4:0:0:0: [sdd]
[ 718.792106] Sense Key : Medium Error [current] [descriptor]
[ 718.792109] Descriptor sense data with sense descriptors (in hex):
[ 718.792111] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 718.792120] 00 00 08 00
[ 718.792124] sd 4:0:0:0: [sdd]
[ 718.792126] Add. Sense: Unrecovered read error - auto reallocate failed
[ 718.792129] sd 4:0:0:0: [sdd] CDB:
[ 718.792131] Read(10): 28 00 00 00 08 00 00 00 08 00
[ 718.792139] end_request: I/O error, dev sdd, sector 2048
[ 718.792143] Buffer I/O error on device sdd, logical block 256
[ 718.792157] ata5: EH complete
[ 972.020852] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 9VP6HXA8
LU WWN Device Id: 5 000c50 0203c63ad
Firmware Version: CC38
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Jul 20 00:47:30 2014 EEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 095 095 006 Pre-fail Always - 232921558
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 420
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 84637
9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31541
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 621
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 315
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 057 045 Old_age Always - 31 (Min/Max 26/31)
194 Temperature_Celsius 0x0022 031 043 000 Old_age Always - 31 (0 26 0 0 0)
195 Hardware_ECC_Recovered 0x001a 027 017 000 Old_age Always - 232921558
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 70776766071255
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 77790758
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 137947391
SMART Error Log Version: 1
ATA Error Count: 320 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 320 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 00 08 00 40 00 00:12:26.380 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:26.379 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:26.370 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:26.370 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:26.370 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 319 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:23.263 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:23.262 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:23.253 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:23.253 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:23.253 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 318 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:20.106 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:20.105 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:20.032 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:20.032 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:20.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 317 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 08 00 00 Error: UNC at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 02 02 08 00 40 00 00:12:16.939 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:16.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:16.929 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:16.929 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:16.929 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 316 occurred at disk power-on lifetime: 31541 hours (1314 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 00 40 00 00:12:13.800 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:12:13.799 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:13.791 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:12:13.790 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:12:13.790 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Yorumlar
Yorum Gönder